Tetrosyl TSH010 Tetraschutz 1L
A fine textured, fast drying bitumen based product, Tetraschutz provides excellent rust protection and sound deadening qualities. Suitable for all lower body panels requiring enhanced protection. Tetraschutz is not suitable for overcoating.
Directions For Use
- Shake can thoroughly before use (Minimum of 2 minutes)
- Spray at a pressure of 70/90 p.s.i (Bar 5/6) and at a distance of 30-45cm
- Drying time: 2 hours at 20C
- Tetraschutz may be applied with a roller or a brush but drying times may be affected
Always ensure the surface to be treated is suitably prepared, and fully degreased with Tetrosyl Compliant Panel Wipe. Check that the spray gun is clean and free from blockages (excess pressure may cause the can to burst.)
Approximately 3 square metres per litre.
Tetrosyl Gun Wash
This product is subject to regulations governing the storage of highly flammable liquids and liquefied petroleum gases.
See separate Material Safety Data Sheet (MSDS)
Manufacturer Part Number: TSH010
Note: This product is for professional use only. Always consult the safety data sheet on the manufacturers website. Always use the relevant personal protective equipment.