KiurLab RH+ De Ironizer For Wheels 5 Litre

Deironizer RH+ by KiurLab – the best rim cleaner
RH+ Deironizer is a special type of cleaning product designed to remove metallic contaminants from the surface of rims and the brake system components. Iron and its impurities (e.g. metallic dust resulting from abrasion of brake discs) often appear on rims as small dots or dirt that is difficult to remove using ordinary cleaning products. RH+ rim deironizer works by chemically dissolving and removing these contaminants, which allows you to obtain clean and shiny rims.

Deironizer RH+ – an advanced deironizer for rim cleaning
Deironizer RH+ KiurLab is a specialized product for the effective removal of troublesome dirt of metallic origin from aluminum and painted rims. It also helps remove these contaminants from the external surfaces of the braking system. Our rim cleaner works using the de-ironization phenomenon. When dissolving metal residues (e.g. iron fallout or very fine volatile rust deposits), we can observe the so-called „bleeding rim” effect. Under the influence of the liquid, contaminants „bleed” in a characteristic red color.

Advantages of KiurLab RH+ deironizer
quick action – the product begins to “bleed” after just a few seconds
perfect consistency – has a slightly gel-like consistency, thanks to which it applies well and stays on the cleaned surface for a long time
active cleaning agents – the product for rims RH+ binds metallic impurities, dissolves typical dirt and deeply penetrates the pores of the cleaned surface, thus ensuring the highest quality and effectiveness of action
longer drying time – under appropriate conditions, the product can remain on the cleaned surface for up to several minutes, making it easier and safer to remove.
How to use KiurLab RH+ deironizer?
RH+ rim deironizer is a strong chemical product for specialized use. It should always be used according to the instructions. When working, ensure good ventilation in the room, always use gloves, a mask and protective glasses.

Recommendations before use:
Make sure the surface you are cleaning is cold
Shake the bottle to mix the contents
Test the effectiveness of the agent on an inconspicuous element of the cleaned surface to eliminate the risk of damaging the rim or other parts of the car
How to use KiurLab RH+ Deironizer
Spray the product on the rim from a distance of approximately 10 cm
In case of heavy dirt or hard-to-reach places, spread the preparation using a brush or toothbrush
Wait a few minutes until the “bleeding” effect appears
Rinse the product with cold water under high pressure
Repeat the operation if necessary