Single Pack (1K) Paint By RAL Code

View our RAL Colour Chart Here: RAL_Colour_Chart_Auto_Factors_Waterford

High quality mixed paint by RAL Code

Simply input the required RAL code in the box provided

Can be brushed, rolled or sprayed on using a spray gun.

Gloss Finish

Touch Dry in 15 to 60 minutes, becomes hard dry in 1.5 to 8 hours, and fully cures in 24 hours

If You Choose collect in store, please allow 2 hours for it to be ready for collection

Always use a Mask and in a when ventilated area when using this product

If using a Spray gun its recommended to use 10% Thinners to allow the paint to spray cleanly and evenly onto workpiece. Thinners Available Here

HMG QAD Enamel – Quick Drying Industrial Metal Topcoat

Built for workshops and fabricators who can’t afford to wait around, HMG QAD Enamel is a tough, fast-drying acrylic alkyd topcoat that delivers a durable, professional finish on prepared metalwork. Made in Manchester by HMG Paints under ISO 9001 quality standards and Made in Britain accredited, it’s a trusted choice for steel fabrication, railings, gates, fencing, outdoor furniture and agricultural equipment.

Its quick air-drying formula keeps jobs moving and turnaround times short, while the hard-wearing film stands up to knocks, weather and the demands of everyday industrial use. Available in a choice of sheen levels and an extensive colour range, including full RAL, BS and agricultural shades, with custom colours made to order.

Key features

• Quick air drying for faster handling and turnaround
• Durable, tough finish suited to industrial and exterior environments
• Single pack, no mixing required
• Multiple sheen levels available
• Huge colour choice: RAL, BS, agricultural and bespoke shades
• Also available in aerosol form for touch-ups and smaller jobs

Technical information

• Coverage: 10–12 m² per litre at 55 microns dry film thickness
• Flashpoint: 24 °C
• Shelf life: 12 months in unopened original containers, stored at 5–25 °C

Preparation
Apply to clean, dry, degreased and primed metal. Remove millscale from mild steel; abrade aluminium before priming; treat galvanised steel with mordant wash and etch primer first. Not suitable over bitumen or chlorinated rubber coatings. A test patch is recommended when coating over existing paint.

Product DATA SHEET AVAILABLE HERE